Silk'n Lipo uses two proven technologies: LLLT and EMS.
LLLT: LLLT (Low Level Laser Therapy) is an established fat reduction technology that's popular in high-end clinics because it's safe and effective. Silk'n was able to shrink the LLLT technology found in clinical-sized machines down to dimensions that can be used at home.
EMS: EMS (Electric Muscle Stimulation) has been used for many years by physical therapists and elite fitness trainers to enhance the muscle strengthening regimes of their clients.
Do not use Silk'n Lipo anywhere near the heart. The electrodes should not be placed on any part of the front ribcage (where the ribs and breastbone are located), and specifically not on the two large pectorals. Also, don't use it on the back ribcage, the head, neck and genitals.
Do not use Silk'n Lipo on areas affected by any medical disorder.
Do not use Silk'n Lipo in the presence of metal, whether internally (metal staples, implants, pins, etc.) or externally (jewellery, piercing, etc.).
For further details please read the safety sections of the user manual.
Silk'n Lipo is designed for use during mild indoor activities. It is not designed for use in parallel with rigorous activities or exercising since this may overactivate the muscles.
The laser in Silk'n Lipo is only applied when it has good contact with the skin. For your protection, the device can detect the absence of such contact and responds by shutting down the energies. This safety feature might also be activated in situations of poor conductivity.
We advise you to wet the electrode pads with water again, and continue the treatment, while ensuring good contact with the skin.
Finally, after 15 minutes of use on the same spot, the device will also shut down the energies to avoid overuse on one spot.
Diode wavelength: 658nm
Diode power: 100mW (max)
Pulse Amplitude: 0-32mA into 1000 ohm load
For a detailed list of specifications, please refer to the user manual.
Always disconnect the stand/charging cradle from the adapter before cleaning.
Clean the treatment units and stand/charging cradle with a damp cloth using a mild detergent, then wipe it dry with a clean cloth.
After each use, wipe the electrode pads and dry with a cloth.
The belts can only be hand-washed. Do not use a washing machine or tumble dryer.