Description

Silk'n Flash n Go Pro gives immediate results differing from the IPL and laser technology used in professional salons, it utilizes the new HPL technology to remove hair painlessly, permanently destroying the hair follicle that will never grow again qualifying itself as an effective permanent hair removal device.

Features

• Permanent Hair Removal with Clinically Proven and Patented HPL™ Technology
• Touch & Glide, Triggerless Feature
• Suited For Your Entire Body and Face
• No Refill Cartridges Required
• 5 power levels to choose from
• Built-in Skin Color Sensor
• Produce 500,000 Flashes
• Large treatment area: 3 cm²
• Dual voltage

Touch & Glide HPL™ Technology
The Flash & Go Pro hair removal system uses HPL™ (Home Pulsed Light) technology to remove unwanted hair, painlessly. The new triggerless feature reduces time spent on your hair removal session so that you can enjoy more time for yourself!

HPL™ technology has been used to permanently remove unwanted hair all over the world. Health Canada and FDA cleared, this technology has been supported by clinical trials, and approved by dermatologists as a safe, easy and effective at-home system.

Touch & Glide Triggerless Feature
The Touch & Glide triggerless feature makes hair removal simple and easy. One button turns the device on and controls the energy levels. All you need to do is touch and glide your hair away!

Simply place the treatment window against the skin of the desired treatment area and the Flash n Go Pro automatically emits a light pulse. You can treat a small area by moving the device from one spot to the next or allow the device to glide across a larger area, completing your sessions in no time.

Protocol & Safety Features
Start with clean, shaven skin.

Treatment Schedule: For the first two months use Flash n Go Pro every other week.

Maintenance Regime: Treat monthly until desired results are achieved (typically 6-8 months).

Treatment is most effective at higher energy levels. It is recommended that you perform a test pulse on your skin prior to treatment and wait 24 hours. If there are no adverse effects, such as redness and irritation, you can bypass lower energy levels.

Flash n Go Pro will automatically adjust energy level if darker skin tone is detected.

With just two-to-four self-treatment sessions, most users experience visually diminished hair that is comparable to results produced by professionally administered laser procedures.

Treatment Areas
Flash n Go Pro is designed for use on the face (cheekbones down), legs, arms, underarms, bikini lines, and other areas of the body where hair removal is desired. This beauty tool is ideal for use with lighter skin tones (I - IV on the Fitzpatrick Skin Tone Classification Scale) and brown-to-black hair.

How it works

Flash n Go Pro emits a pulse of energy (HPL) which is absorbed by the pigment in the hair shaft. Hairs that are in the Anagen growth cycle are targeted by the energy and disabled, preventing future growth. After a series of treatments, users report less hair growth in the treatment area, and eventually the hair will cease to grow.

HPL™ technology: clinically proven and patented
Millions of people all over the world are using IPL technology – mainly in beauty salons – to enjoy long-lasting hair removal. Silk'n was the first brand to make light-based hair removal at home possible with the patented HPL™ (Home Pulsed Light) technology. Our technology is clinically proven and recommended by leading dermatologists as safe, easy and effective. The device is easy to use and results in up to 92.3%* hair reduction after six treatments with two weeks in between each session.

Automatic light pulse system for faster hair removal
This ergonomic hair removal device removes hairs extremely quickly and automatically thanks to the patented Touch & Glide technology. Flash n Go Pro features just one button for switching the device on and off and for switching between the 5 energy levels. This means you no longer have to press a pulse button in order to emit a light pulse.

The Flash n Go Pro hair removal device is the only device with 3 sensors – for skin colour, touch, and movement. The device reads your skin tone (Skin Colour Sensor) to determine whether it is suitable for treatment with the energy level selected. Touch your skin with the device (Touch Sensor), flash automatically, and whenever you stop moving the device over your skin, the device will automatically stop flashing (Movement Sensor). This hair removal device is capable of emitting 500,000 light pulses and has a multi-use treatment area of 3 cm² for effortless hair removal for the body and face.

New: Auto Energy Adjust System for superior safety
With Silk’n Flash n Go Pro, people with a darker skin tone can also use light pulse hair removal. The brand-new Auto Energy Adjust System in combination with the smart Skin Colour Sensor ensures that the energy level of the device can be automatically lowered to energy level 2 – a level safe for all skin tones – when the skin tone is too dark for the device.

How to use

You must decide which energy level is right for your skin, and the area you want to treat. The device has 5 levels of energy from 1 (the lowest) to 5 (the highest). For example, you might treat one area at energy level 1, and another at level 4.

To choose the right energy level, test each treatment area separately.

1. Press the control button to turn on the device. The level 1 energy level indicator light will go on.
2. Place the treatment surface on your skin to deliver one pulse. If you do not experience abnormal discomfort press the control button again. This will increase the energy level. Deliver one pulse on a different spot at energy level 
3. Continue testing at increased energy levels. Use the energy levels indicated on the skin colour chart. When you find the highest energy level that is comfortable for that treatment area, you can start your treatment.

• Use a lower energy level if you experience any discomfort.
• Repeat this test for each part of the body you wish to treat.

You are now ready to use your Silk'n Flash n Go Pro!

1. Before treating an area, the skin should be shaved, clean, dry and free of any powders, antiperspirants or deodorants. Do not wax, pluck or tweeze the hair out. 

Be sure to cover up moles, warts or other marks on the skin that should not be treated.

1. Press the control button. The device will turn on, the level 1 energy indicator light will be on, and a fan sound will start.
2. Approximately 1 second after pressing the control button, the ready light will turn on. The device is then ready to use at the lowest energy level.
3. Set the energy level. Press the control button repeatedly to increase the energy level until you have the level you want. The energy level indicator lights indicate the energy level setting
4. Decide if you wish to treat the area by Gliding or Pulsing.
5. Apply the treatment surface to the skin. Make sure that the skin is spread evenly and smoothly. When the treatment surface is in full contact with the skin, the ready light will start blinking slowly.
6. The device will first determine the colour of your skin automatically and it will flash a pulse of light onto your skin. You will feel a mild sensation of warmth and tingling, and you may hear a popping sound.
7. If you are pulsing, remove the device from your skin. The device will immediately recharge for the next pulse. After a few seconds (depending on the energy level) the ready light will turn on again, and start blinking slowly when pressed against the skin. If you are pulsing, repeat the process. If you are gliding, simply continue. Continue to pulse or glide until you have treated the area fully.

Stop use immediately, if your skin blisters or burns.